Philips LED Waterproof Batten Coreline WT120C 16W 1900lm - 840 | 60cm - DALI Dimmable - Replacer for 2x18W
Specifications Philips LED Waterproof Batten Coreline WT120C 16W 1900lm - 840 | 60cm - DALI Dimmable - Replacer for 2x18W
|Manufacturer Name||WT120C G2 LED19S/840 PSD L600|
|Energy efficiency class||D||
The European Union has drawn up guidelines for energy labels for lighting. The energy efficiency of bulbs and luminaires is expressed in classes (A to G). Energy label A is the most efficient and energy label G the least. The energy label is also stated on the packaging of a product.
|Energy efficiency class old||A+|
|Average Lifetime (h)||50000|
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|Colour temperature (Kelvin)||4000K - Cool White||
Light colour is also known as colour temperature and is expressed in Kelvin (K). You can choose from:
|Colour Code||840 - Cool White||
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
|Colour Rendering (Ra)||80-89||
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|Light Output (Lumen)||1900||
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|Beam Angle (degree)||110||
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
|Luminous Efficacy (Lm/W)||119||
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|Suitable for Outdoor||Yes|
|Fixture Connection||PIP [Push-in connector and pull relief]|
|Optical Cover||PC (Polycarbonate)|
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
|Impact Protection (IK)||IK08||
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
|Operating Temperature||-20 till +35|
|Colour of the Fixture||Grey|
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
Lighting with a sensor or twilight switch only lights up when it receives a certain signal. This reduces energy costs. The (built-in) sensors react to darkness and/or movement.
Description Philips LED Waterproof Batten Coreline WT120C 16W 1900lm - 840 | 60cm - DALI Dimmable - Replacer for 2x18W
The Philips Coreline WT120c waterproof fixture is a direct replacer of conventional waterproof fixtures with fluorescent tubes. After a simple installation you will directly notice a difference in your energy use. For example, the Philips Coreline WT120c uses an average of 51% less energy what assures you of a lower energy bill! You also will not have to worry about replacing the fixture for a long time. The Philips Coreline WT120c lasts up to 50.000 hours.
Like the name suggests, the Philips Coreline WT120c is waterproof. This means that the fixture can be perfectly used in humid spaces, but is also ideal for outdoor use. With an IP-value of IP65, the fixture is protected against infiltration of dust and jet waterproof. This means that it is protected against water, even when water is being sprayed on the fixture from different directions. Furthermore, the fixture is protected against impact with an IK-value of IK08.
With a colour temperature of 4000K, this fixture provides a cool white light. This is mostly suited for spaces where clarity is important. Objects are displayed more natural with it. In addition, a cool white light temperature increases productivity. Also, in combination with the right dimmer, this fixture can be dimmable.
The Philips Coreline WT120c is very easily installable. With a PIP fixture connection (push-in connector), the fixture can be easily plugged in and also easily removed (push relief). Make sure when replacing your conventional waterproof fluorescent fixture that you have chosen the right replaceable wattage. The wattage is connected to the length of the tubes in the fixture (60cm). Furthermore, the fixture works on 220-240V which means it can be connected without any problems to the power network.
The Philips Coreline serie
The Coreline series from Philips combines maximum energy savings with a minimal installation time. In addition, with Philips Coreline products you are always assured of a high quality that that can only be expected of LED lighting.
Budgetlight offers a warranty of 5 years with the Philips Coreline WT120c. Are you interested in a quotation for multiple quantities or do you need advice about the waterproof fixture? Do not hesitate to get in contact with us: we are happy to help!
Need help?Contact our light specialists for free advice.
The product is added to your shopping cart.
Your request has been successfully sent!
Our sales team will now contact you shortly. Together with you, we will collect your data and talk about your personal advantages. Thank you for your trust!
We are sorry
Unfortunately you can only request a quotation if you are an installer or a company. You can always use the special tier discounts for our products.